 |
 |
 |
|
Wayne Dalton 339621 adjustable operator bracket for 9100 and 9600 doors. Adjustable design works with all section heights. Replaces Wayne Dalton part number 326211.
Technical: Manufactured with durable,16 gauge, zinc plated steel, for corrosion resistance & appearance.
Adjustable, telescoping design, to work with all Wayne Dalton residential, doors that utilize an integral strut in the door section.
Expands from 14" to 19" in small increments to fit tightly between the integral door struts.
How to Install an Adjustable Operator Garage Door Bracket
The first thing that you will need to do is locate and set aside all the tools that will be required:
- Power Drill
- 7/16” Socket Driver
- 7/16” Wrench
- Flat Head
Screwdriver
- Step ladder
- Tape Measure
- Pencil
IMPORTANT!
WHEN CONNECTING A TROLLEY TYPE GARAGE
DOOR OPENER TO THE DOOR, AN OPENER/
TROLLEY BRACKET MUST BE SECURELY ATTACHED TO THE TOP
SECTION OF THE DOOR, ALONG WITH ANY U-BARS PROVIDED
WITH THE DOOR. THE INSTALLATION OF THE GARAGE DOOR OPENER MUST BE
ACCORDING TO MANUFACTURER’S INSTRUCTIONS AND FORCE
SETTINGS MUST BE ADJUSTED PROPERLY.
- Position the trolley arm hookup inside the top portion of the top
halve and flush against the back of the top halve. Adjust the top
holes in the trolley arm hookup with the two upper holes in the
top halve.
- Fasten both the trolley arm hookup and top halve together with
(2) 1/4” - 20 x 9/16” track bolts and (2) 1/4” - 20 flange hex
nuts.
- Place the bottom halve inside the top halve and flush against
the inside of the top section. Adjust the both the top and bottom
halves out against the top and bottom rib of top section.
- Loosely fasten both halves together with (4) 1/4” - 20 x 9/16”
track bolts and (4) 1/4” - 20 flange hex nuts.
NOTE:
Install the 1/4” - 20 x 9/16” track bolts and the 1/4” - 20
flange hex nuts as far apart as possible, when positioning the
top and bottom halves together. Also, for retro fit applications, the adjustable operator bracket
must be aligned with an existing operator.
- Locate the center of the top section and align the center of
the holes in the adjustable operator bracket assembly with the
top section center line. Align the adjustable operator bracket assembly vertically.
- First,
secure the back of the adjustable operator bracket assembly to the section
surface with (2) 1/4” -20 x 11/16” self drilling screws.
- Secure the adjustable operator bracket assembly to the top and bottom ribs of the
section with (8) 1/4” -20 x 11/16” self drilling screws.
- Now tighten all previously
installed 1/4” - 20 x 9/16” track bolts and 1/4” - 20 flange hex nuts.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
Wayne Dalton operator bracket for attaching a standard garage door opener to your 5120, 5140, 6100, 9100, 9400, 9600, TGII, & FCII model Wayne Dalton garage doors. This is the only operator bracket that you will need for your Wayne
Dalton double wide garage door (also works on Wayne Dalton single car
garage doors). Note: This bracket replaces previous part number 326211 which is no longer manufactured by Wayne Dalton.
Can be used on all widths of Wayne Dalton residential integral strut doors.
Key Features:
- Designed to fit correctly between the top & bottom integral struts on the top door section.
- Eliminates the top door section damage, caused by incompatible, generic operator brackets.
- Adjustable design to work with all section heights and expands from 14" to 19" in small increments.
Compatibility: Designed & engineered, by Wayne Dalton for Wayne Dalton products, 5120, 5140, 6100, 9400, 9100, 9600, TGII, and FCII garage doors.
*Note this is a direct replacement for Wayne Dalton part number 326211 which is no longer manufactured.
Includes: 1 OEM Wayne Dalton 339621 (339621-1) adjustable operator bracket (as shown), all mounting hardware needed, and easy to follow installation instructions.
Warranty: Comes with a full 30 day manufacturer warranty.
|
|
|
|
|
|
| Customers who purchased this also purchased... |
|
|
|
|
Excellent Product and service!!! 
