Features
The Linear Mega Code MCT-3, is a 3-Channel visor garage door or
automatic gate remote control is designed for use with Linear's Mega Code
series of receivers. Each of the three transmitter buttons will send a
unique code when pressed. One button can be used to activate the
individual’s garage door opener, a second button can operate an access
gate, a third button can activate an additional garage door operator.
Programming is done by pressing the learn button on the receiver then
just press the button on the remote you'd like to use to open the door
or gate.
The transmitter is powered by two type 2032 coin-cell batteries. They
should last 3 years with normal use. The red indicator on the face of
the transmitter will glow when the unit is activated. If the indicator
lights dimly, or not at all when transmitting, the batteries need to be
replaced. To conserve battery life, an internal timer limits the
transmission duration to 10 seconds if the transmitter button is held
down.
Compatibility
Works with LDO33, LDO50, LSO50, LCO75 Linear Garage Door Openers or most Linear 318 MHz MegaCode wireless receivers.
Includes
1 Linear MCT-3 remote transmitter, batteries, visor clip and programming instructions
|
Remotes 
