The Linear Mega Code MCT-11 (DNT00090), is a single channel, one-button visor garage door or automatic gate remote control is designed for use with Linear's Mega Code series of receivers. The transmitter button will send a unique code when pressed and is used to activate the Linear garage door opener. Programming is done by pressing the learn button on the receiver then just press the button on the remote.

The transmitter is powered by two type 2032 coin-cell batteries. They should last 3 years with normal use. The red indicator on the face of the transmitter will glow when the unit is activated. If the indicator lights dimly, or not at all when transmitting, the batteries need to be replaced. To conserve battery life, an internal timer limits the transmission duration to 10 seconds if the transmitter button is held down.

Compatibility
The MCT-11 is also directly compatible with the Linear LD033, LD050, LS050, LC075, LDCO800, LSO50, and LSO50-2T garage door openers.

Includes
Linear MCT-11(DNT00090) remote transmitter, two type 2032 coin-cell batteries, visor clip and programming instruction. Comes with a one year manufacturer warranty.