 |
 |
 |
|
Garage Door Torsion Spring
Star Door Parts is the best place to buy garage door torsion springs because you will find everything you need for replacing the springs in one convenient location, especially if you order our garage door torsion spring kit. Made in America with high-quality steel, coated and tempered with oil, our replacement garage door torsion springs have factory-installed aluminum winding and anchor cones. We have garage door torsion springs for sale and advise you to replace both springs on two-spring systems at the same time for even wear and the best performance.
Shop Star Door Parts for the Most Torsion Spring Options
When you want to double the life of replacement springs, you can upgrade to our high-cycle springs, and we have winding bars, support brackets and cable sets available as well.
Our springs work with Anozira, Martin, Garaga, Genie, Amarr, Windsor, Overhead Door, CHI, North Central, Midland, Ideal, Wayne Dalton, Raynor and Clopay doors, as well as with most residential garage doors seven or eight feet in height.??Notice: These are industry standard torsion spring assemblies and are not compatible with the Clopay Easywind torsion spring systems.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
In order to order the exact springs you need, you will need to configure the spring you need using the options tabs above. You will need to enter the following information: (1) Spring ID (Inside Diameter), (2) Spring length (in inches) , (3) Spring wind (left or right wind), and (4) Wire size. Once configured, please click on the "Update Price" button below the base price to get your configured spring total. You can then add any additional options such as a pair of winding bars and/or upgrade to double life springs for an additional $19.99. Garage door torsion springs come from the manufacturers as standard 10,000 cycle springs at +/- 7.5lbs of target door weight. To upgrade to long life springs just select the high cycle spring option from the drop-down menu above.
If
you do order the high cycle springs, please note that the wire size and
length will be thicker and longer to accommodate the extra number of
winds. When finished, simply select the 'Add to Cart' button to get your total price. You may contact us or call us at 1-952-818-6633 with any questions. If you don't see the size you need, please contact us at [email protected] to place a special order or call us.
Please sure to measure your spring correctly in the unwound position and that you have the proper wind spring (left or right). All torsion spring sales are final and non-refundable. It is the responsibility of the person ordering to verify everything on the order is correct. Please see the following section below to help you measure and order the exact spring you need.
How to Measure Your Garage Door Torsion Spring
Click here to learn how to properly measure your torsion spring and to determine if you need a right or left wind spring, or both if you have a two spring system.
* WARNING/CAUTION
Garage door torsion springs, cables, brackets, and other hardware attached to the springs are under very high tension and, if handled or installed improperly, can cause serious injury. For safety reasons, StarDoorParts.com recommends that only a qualified professional install or adjust torsion springs by carefully and properly following the manufacturer's instructions and also using the proper specialized tools required. StarDoorParts.com disclaims any and all liability (including any obligation or liability under indemnification agreements with distributors or retailers) for death, personal injury, medical expense, property damage or any other expense incurred by customers/consumers who attempt to install or who install torsion springs, parts, etc., purchased from www.StarDoorParts.com. By purchasing torsion springs from this site you hereby (1) acknowledge that you have read and understand this warning/disclaimer, (2) agree to the Terms and Conditions of this site and (3) agree to hold StarDoorParts.com, its owners, employees, officers, agents, affiliates and any other related parties harmless from any and all damages or liabilities that may arise or be associated with the purchase of garage door torsion springs from this site.
|
|
|
|
|
|
| Customers who purchased this also purchased... |
|
Torsion Cable Assembly, 1/8" 7X19, 7'
|
|
Garage Door Cable Drum Set 400-8 (Left & Right pair)
|
|
Wayne Dalton torsion spring center support bracket
|
|
Safety Cable Assembly, 1/8" 7X7, 7'
|
|
|
|
|
|
|
|
|
|
|
|
|
Garage door 1" flanged nylon bushing
|
|
Torsion Cable Assembly, 1/8" 7X7, 7'
|
|
Safety Cable Assembly, 1/8" 7X7, 8'
|
|
Ruler Style Spring Gauge
|
|
|
|
|
|
|
|
|
|
|
|
|
Garage Door Spring Spreader Tool
|
|
Torsion Spring Residential 18" Round Shaft Winding Bars
|
|
Torsion Spring 24" Round Shaft Winding Bars
|
|
Garage Door Flanged Sealed Radial Bearing, 1" Heavy Duty 240024
|
|
|
|
|
|
|
|
|
|
|
|
|
Spring Repair Blocks, Blue
|
|
Superb Safety Glasses
|
|
Garage door 1" flanged bearing 124007
|
|
Torsion Shaft Hammer
|
|
|
|
|
|
|
|
|
|
|
|
|
Torsion Spring Commercial 36" Round Shaft Winding Bars
|
|
Torsion Cable Assembly, Set 1/8" 7X19, 8'
|
|
|
|
|
|
|
|
|
|
|
|
|
As ordered 
